Images are representations only.
Blower Purge Heat Reactivated Desiccant Air Dryer - DBA Series
Brand: Domnick Hunter - by ParkerParker domnick hunter DBA Series Blower Purge Dryer will effectively remove contaminants within a compressed air system.
The traditional adsorption principle used in this design is simple, robust and flexible using compressed air for regeneration therefore eliminating any need for an outside energy supply.
Continuous drying is accomplished by the operation of two desiccant towers. Compressed air is dried through one tower while the other desiccant tower is being regenerated.
The regeneration heating cycle of the desiccant is accomplished using a hot air flow delivered by an atmospheric blower and external electric heater (other means of heating are optional).
The regeneration cooling cycle is performed using a small flow of dry compressed air taken from the dryer outlet to ensure dewpoint performance.
High levels of reliability are achieved by the use of proven engineering technology and components.
Features- Flow range starting at 500 scfm (850 m3/hr)
- Delivered air quality is in accordance with ISO 8573-1:2001, the international standard for compressed air quality.
- Pressure dewpoints of -100°F (-70°C) & -40°F (-40°C) (ISO 8573-1 :2001 Classes 1 & 2) are available.
- Parker domnick hunter High Efficiency OIL-X EVOLUTION pre- and after compressed air filters - Standard
- Energy Management System available (Dewpoint Dependent Switching (DDS)) - Optional
- High-efficiency, quiet running regenerative (up to 3000 scfm) or centrifugal blowers (4000 scfm and larger)
- Parker non-lubricated full-flow angle seat valves, which carry a FIVE YEAR WARRANTY, are standard on dryers up to 800 scfm.
- High performance, rotary actuated switching valves, which carry a FIVE YEAR WARRANTY, are standard on dryers 1000 scfm and larger.
- Insulated tower, heater and purge lines increase dryer performance and efficiency by reducing radiant heat loss plus keeps the unit with the safety parameters set forth by OSHA.
- Easy to use eControl Center affords superior dryer control along with digital telemetry for remote analysis of performance.
Specifications
After-Filter Part Number
- JC0150-FH, JC0350-FH, JC0450-FH, JC0625-FH, JC0800-FH, JC1008-FH, FT3-801-HT, FT4-1201-HT, FT4-1201-HT1, FT6-1201-HT, FT6-1201-HT1, FT6-1803-HT, Consult Factory
After-Filter Replacement Element
- JE-FC0150-HT, JE-FC0350-HT, JE-FC0450-HT, JE-FC0625-HT, JE-FC0800-HT, JE-FC1330-HT, JE-FE1500-HT, JE-FC3000-HT, JE-FC4000-HT, (3) JE-FC2500-HT, Consult Factory
Connection Type
- 1 NPT, 1-1/2 NPT, 1-1/2” NPT, 2” NPT, 3” Flange, 4” Flange, 6” Flange, 8” Flange
Depth (inch)
- 37, 39, 27, 28, 35, 41, 60, 66, 72, 84, 92, Consult Factory
Dryer Technology
- Desiccant, Blower Purge Blower Purge
Height (inch)
- 83, 85, 87, 88, 89, 92, 93, 102, 113, 112, 114, Consult Factory
Installed Condensate Drain
- Timed Solenoid Drain, Demand Solenoid Drain
Maximum Ambient Temperature (°F)
- 120° F
Maximum Flow Rate (m³/hr)
- 170, 340, 510, 680, 850, 1019, 1359, 1699, 2038, 2548, 3398, 4417, 5097, 6796, 8495, 10194, 12743, 15291
Maximum Operating Pressure (psi)
- 150, 135
Maximum Operating Temperature (°F)
- 120° F
Minimum Ambient Temperature (°F)
- 40° F
Minimum Operating Pressure (psi)
- 80
Minimum Operating Temperature (°F)
- 50° F
Pre-installed Optional Accessories
- Pre & after Filtration
Prefilter Part Number
- AA025ENFI, AA030 GNFI, AA035 GNFI, AA040HNFI, AA045HNFI, AA050INFI, AA055JNFI, DH-AA250NDFI-1, DH-AA250ODFI-1, DH-AA300ODFI-1, DH-AA350PDFI-1, DH-AA400PDFI-1, Consult Factory
Prefilter Replacement Element
- 025AA, 030AA, 035AA, 040AA, 045AA, 050AA, 055AA, 060AA, (3) 060AA, (4) 060AA, (6) 060AA, (10) 060AA, Consult Factory
Purge Rate
- 0
Rated Inlet Pressure (psi)
- 100
Type
- Blower Purge
Weight (Lbs)
- 1050, 1500, 1900, 2180, 2840, 3420, 4490, 5700, 6300, 7165, 9850, 12210, 12650, 18910, 21590, 24890, Consult Factory
Width (inch)
- 49, 56, 43, 47, 50, 52, 64, 74, 78, 114, 132, 168, 156, 146, Consult Factory
